DRYLOK® natural look sealer is a non-yellowing protective coating that can be used as a sealer or concrete curing membrane. As a sealer, DRYLOK® natural look sealer penetrates deep to seal and protect masonry against acids, alkalis, road salts, de-icing compounds, household cleaners, gasoline, oil and weathering. Protects against dusting, staining and spalling. As a concrete hardener, When applied to freshly poured concrete, after the surface has set for 24 hrs and excess water has been removed, DRYLOK® natural look sealer will control water evaporation resulting in maximum concrete hardness.
- Matte finish with minimal film build for a natural appearance
- Moisture vapor barrier
- Protection level 15% solids
- Use on vertical and horizontal surfaces
- Easy cleanup with warm, soapy water
| Applicable Materials | Alkyd Latex |
|---|
| Application Method | Brush Roller Spray Squeegee |
|---|
| Application Temperature | 50 deg F |
|---|
| Base Type | Latex |
|---|
| Boiling Point | 100 deg C |
|---|
| Color | Clear |
|---|
| Compositions | Propylene Glycol Propanol Oxybis- Dibenzoate |
|---|
| Container Type | Pail |
|---|
| Coverage Area | 400 sq-ft/gal |
|---|
| Density | 8.4 lb/gal |
|---|
| Drying Time | 2 hr |
|---|
| Finish | Matte |
|---|
| Form | Liquid |
|---|
| Net Content | 1 gal |
|---|
| Odor/Scent | Amine |
|---|
| pH Range | 8.1 to 8.5 |
|---|
| Specific Gravity | 1.02 |
|---|
| Traffic Time | 24 hr Heavy Traffic |
|---|
| VOC Content | 100 g/L |
|---|
